Autodesk Update Advisory: .NET 10 Updates and AFS Vaults

Release Supplement: Adept Viewer 11.4.5 Service Pack 1

:info:

Applicable Adept Release: Adept 11.4.5 only

Release Type: Service Pack (Adept Viewer only)

Intended Audience: Adept administrators and anyone who views, prints, or publishes documents in the Adept Viewer

Last Update:


Executive Summary

Adept Viewer 11.4.5-SP1 replaces the engine that Adept Viewer uses to produce PDFs. This covers Print and Publish PDF in the viewer, and Print To and Render PDF in the Adept clients. The new engine is built for stability, speed, and accuracy, and it handles large, multi-sheet drawings that the previous engine could not. Markups on drawings are drawn as vector lines, so they stay sharp when you zoom in on the PDF.

In our tests, the new engine produced these results:

  • Publish PDF and Print in the viewer were 3 to 10 times faster on typical DWG, DGN, and PDF files. Publishing all sheets of a 45 MB drawing dropped from about 6 minutes to 16 seconds.

  • Publishing an unchanged document again took under 1 second, because SP1 reuses the PDF it already made.

  • Two large drawings that hit the previous engine's 20-minute limit without producing a PDF now publish in 2 to 4 minutes.

These results come from our lab. Actual results will vary, as every customer's data is different.

This service pack also addresses these customer-reported issues:

  • PDF print and publish jobs that stop before they finish

  • Large DWGs that won't open or publish in the web client

  • DWG sheets that fail to convert

  • Conversions that stop until the viewer service is restarted

  • Markups that shift position or don't appear on multi-page PDFs

  • The viewer stops when a user's connection drops

  • Markups saved on 11.3.3 are overwritten the first time they are opened after the upgrade

  • The viewer service stops on Windows Server 2025 after the October 2026 Windows update

What It Changes

This service pack only updates the Adept Viewer Web Server and the Adept Local Viewer. Adept Server, Adept Web Server, and Adept client applications are not changed.

We recommend this update for every 11.4.5 site, especially sites that:

  • Are upgrading from Adept 11.3.3 (see "Upgrading from 11.3.3")

  • Print or publish PDFs from Adept

  • Run the Adept Viewer Web Server on Windows Server 2025 (see "Windows Server 2025")

Installation & Deployment

Before You Install

  • Adept 11.4.5 with Adept Viewer 11.4.5 must be installed. Server and workstation requirements are the same as for Adept 11.4.5.

  • Install SP1 on the Adept Viewer Web Server, which serves the Web Viewer used by Explorer, Reviewer, and Creator users.

  • Install SP1 on each workstation that runs the Adept Local Viewer, the desktop version of the Web Viewer that Adept Desktop, Adept Task Pane, and Adept Creator Viewer open. PDFs produced on a workstation (Render PDF with local viewing, or Print File(s) from Adept Desktop) use that workstation's viewer.

  • We recommend that you test this update in a non-production environment before rolling it out to production.

  • Schedule the installation outside working hours. Conversions waiting when the viewer stops are cleared, and users need to retry them.

  • All viewer one-off fixes installed in 11.4.5 are included in SP1.

Installation Steps

  1. Close Adept and the Adept Viewer.

  2. Run the Adept Viewer 11.4.5-SP1 installer over the existing 11.4.5 installation. Existing viewer settings are kept.

  3. Restart if Windows asks. This happens only if viewer files were in use or a prerequisite the installer added needs a restart.

  4. Start the Adept Viewer.

  5. Confirm the new engine is active. Publish a document with markups to PDF, then check the ConverterWorker log for a line naming MarkupRenderer.exe ("...MarkupRenderer.exe is starting with arguments").

After You Install

  • On workstations, the installer clears the Adept Local Viewer's cache. The first View of each document takes longer while it is cached again, and the first View can fail once with "failed to cache" (AV-809). View it again. Markups are stored on the Adept server and are not affected.

  • If drawings failed before with a "16 MB" or "exceeds 16777214" message, clear the viewer cache for those drawings so they convert again. The first open of a very large drawing can take several minutes.

  • Open a document with markups, publish it from the viewer, use Print To from Adept Desktop, and check that both PDFs render as expected.

Upgrading from 11.3.3

  • Install Adept 11.4.5 and then SP1 before users open any documents with markups. SP1 protects markups saved on 11.3.3 the first time they are opened. Adept 11.4.5 without SP1 does not protect them in every case.

  • Some 11.3.3 markups look different in the viewer after the upgrade, while their published PDFs keep the 11.3.3 appearance.

Windows Server 2025

With SP1, the Adept Viewer runs as a Windows service on Windows Server 2025 with the October 2026 Windows update installed. You no longer need to remove or block that update. Sites that Product Support moved to the alternate viewer can stay on it.

If the viewer runs as an application instead of a service, it can still stop. To prevent this, set the system environment variable ADEPT_VIEWER_GPU_MODE to sandboxoff and restart the viewer. The November Windows update (KB5131080) also fixes this, even without SP1.

Windows Server 2022 is not affected.

Support

If you see unexpected behavior after installing, contact Adept Product Support and reference this bulletin.